Gear Case Oil Change
- Place the outboard motor vertical.
- Remove the oil level check bolt, oil drain bolt, and washer, and drain the gear case oil into a suitable container. Check for water in the drained gear case oil. If there is water, inspect gasket and water seal for damage and torque at each tightening point of the gear case.
- Using the gear oil bottle (optional part) or commercially available oil gun, pour fresh gear oil through the oil drain bolt hole.
Recommended oil: SAE 90 outboard motor gear oil API standard GL-4 or GL-5
Oil capacity: 0.05L (0.05 US qt., 0.04 Imp. qt)
- When the oil flows out of the oil check hole, install a new sealing washer and oil check bolt quickly.
- Then install the oil drain bolt with a new sealing washer.
- Tighten the oil drain bolt and oil check bolt securely.
TORQUE: 3.5 Nm (0.35 kgf/m, 3.8 Ibf/ft)
