Periodic Maintenance Procedures
Idle Speed Adjustment: Start the engine and warm it up thoroughly. Correct the idle adjusting screw until the idle speed is within the specified range. Open and close the throttle a few times to ensure proper adjustment.
Fuel System Cleanliness Inspection: Turn the ignition switch OFF. Ensure the area is well-ventilated and free from any source of flame or sparks. Turn the fuel tap to the OFF position and drain the fuel system into a suitable container. Inspect for water or dirt in the drained fuel. Clean the fuel system if any contaminants are present.
Air Cleaner Element Cleaning and Inspection: In dusty or muddy conditions, clean the air cleaner element more frequently. After riding in wet conditions, clean the element immediately. Replace the element if there is any damage. Clean the element in a well-ventilated area, avoiding sparks or flames. Do not use gasoline or low-flash point solvents for cleaning.
For detailed instructions, refer to the Kawasaki ATV Service Manual.
